The Best of Today's
Water Technology

in One Complete System

2 Pure H2O - Pure Water System
The Under-the-Counter Water Purifier



Click Here for Printable PDF Version of the 2PureH2O System

2pure 2pure
2pure 2pure


 Click on Boxes in Flow Chart above for detailed explainations

 

Beyond Healthy, Beyond Safe, It's Ultra Pure!

PHASE I "Ultra-Pure"

Under counter water filters "polish" or cleanse your water by reducing the amount of rust and sediment, odors and chlorine, lead, bacteria, and volatile organic compounds (VOCs) including pesticides like linden and herbicides like atrazine. An under counter water filter in your home will provide you with great tasting water for drinking, cooking, and making beverages like coffee, tea, and juices.

 
STAGE 1 & 2 - SEDIMENT AND CARBON BLOCK FILTER

Throughout the first filtration stage, tap or well water passes through a sediment filter where silt, sediment and particles (like sand and clay) are removed. Then in the second stage, water is forced through a high efficiency solid carbon block filter where 10 micro-pulverized carbon efficiently absorbs chlorine, chloramines, pesticides and other harmful organic chemicals and pollutants. This pre-filtered water is now cleaned of membrane-damaging particles and chemicals. These stages protect the RO (reverse osmosis) membrane from harmful damage.

Back to Flow Chart


STAGE 3 & 4 -REVERSE OSMOSIS (First Purifier)

For most areas of the world, RO (reverse osmosis) is the only reasonable option for water treatment. It is a continuous self-cleaning ultra-filtration system. ROs remove up to 95% of undesirable water contaminants and total dissolved solids allowing only the clean water to pass. Only the highest quality RO membranes have been individually tested and selected for the "2 Pure H2O" Water System, these membranes usually last 2 to 5 years. The pre-filtered water passes through a thin film reverse osmosis membrane module where pure water molecules are separated, leaving salts, hardness, bacteria, viruses, pyrogens and other impurities isolated and available for flushing from the system. Afterwards the cleaned water goes thru the R.O. membrane, and then passes into an under-the-counter 2.5-gallon pressurized storage tank. This tank usually fills in 1 to 2 hours.

The quality of your product water in other single purification reverse osmosis systems depends on the age and quality of the RO membrane. Lower quality membranes can remove up to 95% when new but weakens quickly over time, requiring replacement up to every year.

Back to Flow Chart

 
STAGE 5 & 6 - DEIONIZATION

Deionization is a method used most often by laboratories to produce purified water on demand. All naturally occurring water contains dissolved mineral salts. In solution, salts separate into positively charged cations and negatively charged anions. Deionization can reduce the amounts of these ions to very low levels (up to a 90% removal of the remaining 5% left from reverse osmosis), through the process of ion exchange.


Cations are removed by cation exchange resin. It replaces sodium, calcium, magnesium, and other cations with hydrogen ions (H+).

 

Two general types of anion resin are used for deionization: weak base resin and strong base resin. Weak base resin adsorbs strong acids, while strong base resin exchanges chloride, sulfate and alkaline anions for hydroxide ions (OH-). The hydrogen ions from the cation exchange process combine with the hydroxide ions anion exchange process to form water (HOH or H2O).

 

In a mixed bed deionizer, cation and anion resins are thoroughly mixed in a single cartridge. The mixed resins act like a series of alternating cation and anion exchange cartridges to produce very high quality water. A mixed-bed deionizer typically removes 90% of the remaining total dissolved solids.

Back to Flow Chart


STAGE 7 - STAINLESS STEEL ULTRAVIOLET LIGHT

Bacteria and Virus Disinfection- 3/4" connection - stainless steel housing

A UV lamp purifier should be installed in every home to provide safe drinking water. A must for rural homes or cities where water quality is questionable. Ultraviolet (UV) Lamps disinfect water for residential and commercial applications. UV light disinfection systems will protect you from harmful bacteria (e-Coli), virus, and parasitic cysts (cryptosporidium and giardia-lambia - beaver fever) that have been found in drinking water.

Chlorination of municipal water is not sufficient to kill cysts. Many communities and private homes draw surface water from lakes, streams, reservoirs, or wells that are open to pollution from natural, agricultural and industrial sources.

Ultraviolet lamps create light at 254 NM wavelength; this wavelength penetrates the micro organisms found in water and damages the DNA of the bacteria and virus to prevent replication and renders the organism inactive (all bacteria, virus, moulds, algae, and yeast).  Usually UV systems are installed on the inlet pipe to your home killing bacteria and viruses from your incoming water line.

The "2 Pure H2O" water system, pre-filters the water before it reaches the UV system. The reduction levels are 99.99% in properly sized systems. The UV unit does not add any chemicals or by-products to the water. The UV unit uses 25 to 65 watts of power, the same as a light bulb. It plugs into a wall outlet. It is better to leave the unit on all the time; the lamp is rated for 1 year of continuous use. The unit has an alarm to warn of failure. An optional solenoid valve will prevent water flow in case of power failure.

With the "2 Pure H2O" system, cleaning of calcium and iron deposit from the UV lamp is not required. Calcium and iron do not build up on the UV lamp because of the pre-filtration of the water prior to reaching the lamp. The frequency of cleaning for the "2 Pure H2O" Pure Water System depends on the quality of water entering your home. We recommend inspection at least every 6 months. The UV light is resistant to damage by brownouts and voltage fluctuations. It will withstand a range of 90 - 265 volts and still operate properly.

Back to Flow Chart


STAGE 8 - POST CARBON FILTER

Helps to reduce particles and prevent possible damage to water-tight seals in faucets and appliances, therefore cutting down on maintenance costs.  The Post Carbon Filter uses an activated medium with hundreds of thousands of square feet of absorption area which helps to improve the taste and odor.

Back to Flow Chart

PHASE II "VitaTech"

Vitality Enhancing Technology

From physics, we know that everything is vibration. Every material reacts on certain frequencies more or less strongly. Ideal vibrations create impulses, which, under defined circumstances, start a chain reaction (of vibrations) with increasing force.  Water is changeable; it is able to absorb, transfer and release information in its structure. Therefore, even after physical purification, water still often carries unhealthy electromagnetic frequencies from poisonous substances.

In the last stages of water purification, "2 Pure H2O" technology will erase unwanted frequencies, and reprogram the water to copy that of nature.  


STAGE 9 & 10 - REPROGRAMMING

Erasing Memory Molecule Coherence

A triangular shape magnets is held in a steel casing. Each side of the triangle is a 12,000 Goss NdFeB (Neodymium) magnet. At the center point of the triangle where the magnetic energy surrounds the water as it flows through this section, there is a 36,000 Goss energy touching the tube where the water comes through.

A magnetic field has a defined effect on the passing water. It influences the ions within the water to enhance ion exchange that will improve the oxygen utilization of the water. Most importantly we can imagine the effect of the O2-Pure technology with its ability to erase unwanted frequencies. Yes, as humans we need the right kind of frequencies. This brings us to the next step in "2 Pure H2O" technology.

Back to Flow Chart


STAGE 11 - REPROGRAMMING

Adding Natural Mineral Properties

When the water flows over the rocks (74 minerals), the previous memory is erased. The 74 minerals then provide new frequencies.  The water molecules are shaken by the special field in a way that, for a short time, the clusters and the hydrogen bridges are broken up. At the same time, the water is carried forward in a s-pattern movement, identical to that of water in nature. It is the frequencies of these minerals (that are released into the water) that make the change, and not the minerals themselves.

Back to Flow Chart


STAGE 12 - REPROGRAMMING

Adding  Natural Earth Properties  

Far-infrared energy is sometimes called "the wavelength of life" which causes the water molecules in the body to vibrate.  When the water flow is channeled through natural far-infrared honeycomb shaped ceramic materials, the water is imprinted with the far-infrared frequencies.

Back to Flow Chart


STAGE 13 - REPROGRAMMING

Natural Flow Form Surface Tension Lowered

At the same time, the water is brought in a movement (s-pattern), which is copied by nature.  When the water flows moves through the ceramic far-infrared balls (also containing minerals) it creates a "S" shape configuration (pattern) that mimics and energizes the water (like free flow form water). The surface tension is reduced, improving the biological permeability and hydration properties.


STAGE 14, 15 & 16 Calcium, Magnesium, and Coral Calcium Re-Mineralization

Calcium and Magnesium and Coral Calcium are now added to the water stream to add a small amount of minerals to balance the water. The effect of these special minerals is to help balance the pH and energize the water, giving it more electrons.

The "2 Pure H2O" Water System combines a number of simple and highly sophisticated technologies, along with precision filters to remove impurities. Some stages remove contaminants more effectively than most conventional filters. Other components of the system energize and re-mineralize the water, using Vitality Enhancing Technology to provide sparkling clear, great-tasting water. One of the basics of good health is a daily intake of clean water. It's simple. It's convenient. And it can have a major impact. Now it's possible to have a source of water that is chemically and energetically ready to support your health, right in your home.

Quality housings, filters, and durable mounting frames ensure years of dependable service. Installation by a professional plumber required. Depending on your household needs, look at our whole house carefree chlorine removal system.

Back to Flow Chart

 

QUESTION and ANSWERS

Q. Is it okay to use a water softener with the "2 Pure H2O" Water System?

A. Yes, Water Softeners will reduce build up and scaling to extend the life of your water heater, water pipes, fixtures and appliances. Using a Water Softener (good potable water) in combination with the "2 Pure H2O" Water System will extend the life of the RO membrane.  

Q. If you have hard water and no water softener can you still use the "2 Pure H2O" Water System?

A.  It is preferred that you use a water softener.  Hard water is more than a nuisance. It is costly too.  It contains calcium, magnesium, and iron which build up inside your water heater, water pipes, fixtures and appliances.  The "2 Pure H2O" Water System provides the highest quality RO membrane in order to provide the best (rejection) quality of water for the longest period of time.  Hard water will shorten the life of the membrane and  therefore will require replacing more often. 

Q. I use a water distiller, and the taste of the water is flat and heavy. What does the water taste like from the "2 Pure H2O" Water System? 

A. With the "2 Pure H2O" Water System, the taste is like natural spring water, with a nice light mineral taste that refresh your thirst. Vitality Enhancing Technology restores the water's natural mineral properties and improves the surface tension, and biological availability, as well as increased hydration of your body. Everything you use water for will taste better.

Q. What is Vitality Enhancing Technology?

A.  This a new technology is exclusively from "2 Pure H2O" Water System.  It is the first of its kind to be introduced to purify home drinking water which offers ultra purified restructured water. Vitality Enhancing Technology is the next step in water purification and enhancing your health.   

Q. How does the "2 Pure H2O" Water System compare to buying bottled water for drinking?

A.  No heavy bottles to lift, no trips to the store, and no monthly billing required. All bottled water, even the best, is inconvenient for a family. Tests indicate that most bottled water may be of low quality and often does not even meet the same standards as tap water. Bottled water is more costly than the water prepared with the "2 Pure H2O" Water System. This system can produce approximately 50 gallons of ultra pure water daily. When the quality and performance is combined, it is the most cost-efficient convenient method of getting pure great-tasting water.

"2 Pure H2O" WATER SYSTEM
$1,895.00

Stage 1 and 2 Stage 5 Stage 5 Stage 7 Stage 3 and 4 Stage 14, 15 and 16 Stage 13 Stage 12 Stage 12 Stage 11 Stage 9 and 10 Stage 6 Stage 8

To find out more about
"2 Pure H2O" WATER SYSTEM
Please contact the Dealer that referred you here.

If you need a Dealer Referral, please call:
Environmental Technology
1-800-827-0762

Installation: Restructuring Unit | Upper Close-Up | Middle Close-Up | Lower Close-Up

May You Be BlessedThe Interview with God10 Seconds

SEND THIS PAGE TO A FRIEND: If you know someone who could benefit from the information on this page, please forward it to them by clicking FILE, SEND (on the toolbar in your web browser).


The statements herein have not been evaluated by the Food and Drug Administration. The products mentioned on this site are not intended to diagnose, treat, cure, or prevent any disease. Information and statements made are for education purposes and are not intended to replace the advice of your doctor.

Stage 1 and 2 Stage 5 Stage 5 Stage 7 Stage 3 and 4 Stage 14, 15 and 16 Stage 13 Stage 12 Stage 12 Stage 11 Stage 9 and 10 Stage 6 Stage 8